Our products are sold through independent, marine and agricultural re-sellers in the Southeastern United States. We do not sell directly to homeowners or contractors.

Pressure Treating is the application of a preservative formulation that is forced into the wood under pressure in a large cylinder. This form of treatment is a safe and proven means to preserve and protect outdoor wood from decay and termite attack. Pressure treatments extend the life of wood, and reduce the impacts on forests, making them truly one of the most sustainable building materials used in the world today.

Wood is pressure treated to give it protection from attack by insects, microorganisms, decay by fungi and moisture that can cause damage to the wood. Treated wood provides users a longer lasting product by extending the service life and the useful life of structures.

The American Wood Protection Association standards provide a list of standardized preservative formulations in the US. The AWPA’s is recognized worldwide, as their ANSI accredited process thoroughly evaluates reviews and standardizes preservatives. AWPA standardized preservatives are approved by all building codes for their intended uses. Visit AWPA.com and their Technical and References sections for Homeowners, Specifiers, Builders and Retailers for more information.

No maintenance is needed to renew resistance to fungi and termites when you are buying treated lumber from Robbins. There is a limited warranty against these organisms. However, protection is required to maintain the wood’s appearance against weather. Sun and rain cycles cause stresses in lumber and result in swelling, shrinking, warping, and cracking. To help protect your project against moisture damage, apply an effective brand of surface water repellent every year or two.

Selecting the right fasteners will help ensure the longevity of your project. For the typical exterior structures exposed to the elements we advise builders to use hot-dipped galvanized fasteners (meeting ASTM A 153) and connectors (ASTM A 653 Class G185 sheet), or better, are recommended. For permanent wood foundations and corrosive environments, such as areas with saltwater spray, use 304 or 316 stainless steel.  Always check with the fastener / connector/ flashing manufacturer’s recommendations prior to use.

Ground contact means that the product is approved for use in applications that require direct contact with the ground. This includes any applications where it will need to be used in the ground such as posts for fences or decks.

Clean up treated wood scraps and sawdust after construction and dispose in accordance with federal, state and local regulations. Do not burn treated wood, as toxic materials may be produced as part of the smoke or ashes.